The business began with 1 Milling Machine and today has a fleet of 18 Wirtgen Milling Machines,3 Lowbeds & a Mechanical Vacuum Road Sweeper. VPSB provides fully qualified milling machine operators, has a full in-house service team & heavy duty drivers.

Our primary function is the milling of tar and concrete roads for rehabilitation. Hire of 1/2 m, 1m & 2m Milling Machines and Mechanical Vacuum Road Sweeper.

Rehabilitation measures for roads and surfaces include milling of traffic or parking areas consisting of asphalt or concrete, thus maintaining or adjusting them to changing traffic loads.

Milling is the customary construction method used to remove damaged layers while at the same time maintaining the usable layers of the upper pavement structure.

The damaged layer can then be replaced by a new layer complying with the latest technical rules and regulations.

Fine milling can be carried out in flowing traffic, and the milled surface can immediately be trafficked again after sweeping or vacuum cleaning.

With a small milling machine, on the other hand, the depth to which the surrounding pavement is to be removed can be adjusted very precisely. Depending upon the type of machine used, the manhole can be laid open to a depth of 28cm. For this purpose the machine simply drives around the manhole cover once. Its height can the be corrected using different methods, such as inserting intermediate rings. After that, the area surrounding the manhole cover is either refilled with new asphalt material or paved with cobblestones.